dmesg - Seagate ST2000NM000A-2J2
Linux version 5.4.0-52-generic (buildd@lgw01-amd64-060) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #57-Ubuntu SMP Thu Oct 15 10:57:00 UTC 2020 (Ubuntu 5.4.0-52.57-generic 5.4.65)
Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/custom.seed boot=casper initrd=/casper/initrd.gz quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009a027fff] usable
BIOS-e820: [mem 0x000000009a028000-0x000000009dc33fff] reserved
BIOS-e820: [mem 0x000000009dc34000-0x000000009dd80fff] usable
BIOS-e820: [mem 0x000000009dd81000-0x000000009e1b1fff] ACPI NVS
BIOS-e820: [mem 0x000000009e1b2000-0x000000009ec0efff] reserved
BIOS-e820: [mem 0x000000009ec0f000-0x000000009ec0ffff] usable
BIOS-e820: [mem 0x000000009ec10000-0x000000009fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000085bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.2.0 present.
DMI: Supermicro Super Server/X11SCZ-F, BIOS 1.5 10/21/2020
tsc: Detected 3400.000 MHz processor
tsc: Detected 3399.906 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x85c000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 2000000000 mask 6000000000 uncachable
3 base 1000000000 mask 7000000000 uncachable
4 base 4000000000 mask 4000000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0x9ec10 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce40-0x000fce4f]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
RAMDISK: [mem 0x7ae87000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM)
ACPI: XSDT 0x000000009E0940C0 000104 (v01 SUPERM SUPERM 01072009 AMI 00010013)
ACPI: FACP 0x000000009E0D2350 000114 (v06 01072009 AMI 00010013)
ACPI: DSDT 0x000000009E094260 03E0EB (v02 SUPERM SMCI--MB 01072009 INTL 20160527)
ACPI: FACS 0x000000009E1B1F80 000040
ACPI: APIC 0x000000009E0D2468 00012C (v04 01072009 AMI 00010013)
ACPI: FPDT 0x000000009E0D2598 000044 (v01 01072009 AMI 00010013)
ACPI: FIDT 0x000000009E0D25E0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: MCFG 0x000000009E0D2680 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: SPMI 0x000000009E0D26C0 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: SSDT 0x000000009E0D2708 001B26 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000009E0D4230 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: HPET 0x000000009E0D73F8 000038 (v01 SUPERM SMCI--MB 00000002 01000013)
ACPI: SSDT 0x000000009E0D7430 001CD5 (v02 SUPERM CflS_Rvp 00001000 INTL 20160527)
ACPI: SSDT 0x000000009E0D9108 000FAE (v02 SUPERM Ther_Rvp 00001000 INTL 20160527)
ACPI: SSDT 0x000000009E0DA0B8 002FCE (v02 INTEL xh_cfsd4 00000000 INTL 20160527)
ACPI: UEFI 0x000000009E0DD088 000042 (v01 SUPERM SMCI--MB 00000002 01000013)
ACPI: LPIT 0x000000009E0DD0D0 000094 (v01 SUPERM SMCI--MB 00000002 01000013)
ACPI: SSDT 0x000000009E0DD168 0027DE (v02 SUPERM PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x000000009E0DF948 0014E2 (v02 SUPERM TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000009E0E0E30 000034 (v01 SUPERM SMCI--MB 00000002 01000013)
ACPI: DBG2 0x000000009E0E0E68 000054 (v00 SUPERM SMCI--MB 00000002 01000013)
ACPI: SSDT 0x000000009E0E0EC0 001B67 (v02 SUPERM UsbCTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000009E0E2A28 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
ACPI: TPM2 0x000000009E0E2B70 000034 (v04 SUPERM SMCI--MB 00000001 AMI 00000000)
ACPI: ASF! 0x000000009E0E2BA8 000074 (v32 SUPERM SMCI--MB 00000002 01000013)
ACPI: DMAR 0x000000009E0E2C20 000090 (v01 INTEL EDK2 00000002 01000013)
ACPI: WSMT 0x000000009E0E2CB0 000028 (v01 w? 01072009 AMI 00010013)
ACPI: EINJ 0x000000009E0E2CD8 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 0x000000009E0E2E08 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 0x000000009E0E3038 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 0x000000009E0E3068 00027C (v01 AMI AMI.HEST 00000000 AMI. 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000085bffffff]
NODE_DATA(0) allocated [mem 0x85bfd5000-0x85bffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000085bffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000009a027fff]
node 0: [mem 0x000000009dc34000-0x000000009dd80fff]
node 0: [mem 0x000000009ec0f000-0x000000009ec0ffff]
node 0: [mem 0x0000000100000000-0x000000085bffffff]
Zeroed struct page in unavailable ranges: 40686 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000085bffffff]
On node 0 totalpages: 8347922
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9798 pages used for memmap
DMA32 zone: 627062 pages, LIFO batch:63
Normal zone: 120576 pages used for memmap
Normal zone: 7716864 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9a028000-0x9dc33fff]
PM: Registered nosave memory: [mem 0x9dd81000-0x9e1b1fff]
PM: Registered nosave memory: [mem 0x9e1b2000-0x9ec0efff]
PM: Registered nosave memory: [mem 0x9ec10000-0x9fffffff]
PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xa0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 8217463
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/custom.seed boot=casper initrd=/casper/initrd.gz quiet splash --
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32632296K/33391688K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 759392K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 44527 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000009e6a6000 end: 0x0000009e8effff
DMAR: RMRR base: 0x0000009dbb3000 end: 0x0000009dc32fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3101f59f5e6, max_idle_ns: 440795259996 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.81 BogoMIPS (lpj=13599624)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Enhanced IBRS
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Mitigation: TSX disabled
SRBDS: Mitigation: TSX disabled
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Xeon(R) E-2278G CPU @ 3.40GHz (family: 0x6, model: 0x9e, stepping: 0xd)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (108796.99 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9dd81000-0x9e1b1fff] (4395008 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 18:27:55, date: 2020-12-24
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1608834475.052:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF7109000 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF7101400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF73C9000 000689 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF710F400 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF73CE800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF73CF800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF6C0C000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF6C16000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF943BF6C0AC00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 14.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 7F
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [PAUD] (on)
ACPI: Power Resource [SPR0] (off)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [PXTC] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: Power Resource [PIN] (off)
ACPI: Power Resource [SPR1] (off)
ACPI: Power Resource [SPR2] (off)
ACPI: Power Resource [SPR3] (off)
ACPI: Power Resource [SPR5] (off)
ACPI: Power Resource [ZPDR] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3e31] type 00 class 0x060000
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xa2441000-0xa2441fff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0xa2440000-0xa2440fff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa2420000-0xa242ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0xa2436000-0xa2437fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0xa243f000-0xa243ffff 64bit]
pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa243c000-0xa243cfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa2434000-0xa2435fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa243b000-0xa243b0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5050-0x5057]
pci 0000:00:17.0: reg 0x1c: [io 0x5040-0x5043]
pci 0000:00:17.0: reg 0x20: [io 0x5020-0x503f]
pci 0000:00:17.0: reg 0x24: [mem 0xa243a000-0xa243a7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
pci 0000:00:1c.5: [8086:a33d] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PTM enabled (root), 4ns granularity
pci 0000:00:1c.6: [8086:a33e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PTM enabled (root), 4ns granularity
pci 0000:00:1c.7: [8086:a33f] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PTM enabled (root), 4ns granularity
pci 0000:00:1e.0: [8086:a328] type 00 class 0x078000
pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:1f.0: [8086:a309] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa2430000-0xa2433fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa2100000-0xa21fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa2438000-0xa24380ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:00:1f.6: [8086:15bb] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xa2400000-0xa241ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xa2300000-0xa237ffff]
pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
pci 0000:02:00.0: reg 0x1c: [mem 0xa2380000-0xa2383fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xa2300000-0xa23fffff]
pci 0000:03:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 03-04]
pci 0000:00:1c.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.6: bridge window [mem 0xa1000000-0xa20fffff]
pci_bus 0000:04: extended config space not accessible
pci 0000:04:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xa2000000-0xa201ffff]
pci 0000:04:00.0: reg 0x18: [io 0x3000-0x307f]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa20fffff]
pci 0000:05:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xa2200000-0xa2207fff 64bit]
pci 0000:05:00.0: PME# supported from D3cold
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [mem 0xa2200000-0xa22fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:04:00.0: vgaarb: setting as boot VGA device
pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:04:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x9a028000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9dd81000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ec10000-0x9fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0a00-0x0a2f] has been reserved
system 00:01: [io 0x0a30-0x0a3f] has been reserved
system 00:01: [io 0x0a40-0x0a4f] has been reserved
system 00:01: [io 0x0a50-0x0a5f] has been reserved
system 00:01: [io 0x0a60-0x0a6f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 5 override to edge, high
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0680-0x069f] has been reserved
system 00:08: [io 0x164e-0x164f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x1854-0x1857] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [io 0x1800-0x18fe] could not be reserved
system 00:0b: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:0b: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:0b: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:0b: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0b: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [io 0x2000-0x20fe] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0xfd6e0000-0xfd6effff] has been reserved
system 00:0d: [mem 0xfd6d0000-0xfd6dffff] has been reserved
system 00:0d: [mem 0xfd6b0000-0xfd6bffff] has been reserved
system 00:0d: [mem 0xfd6a0000-0xfd6affff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:15.0: BAR 0: assigned [mem 0xa0000000-0xa0000fff 64bit]
pci 0000:00:15.1: BAR 0: assigned [mem 0xa0001000-0xa0001fff 64bit]
pci 0000:00:1e.0: BAR 0: assigned [mem 0xa0002000-0xa0002fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xa2300000-0xa23fffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa20fffff]
pci 0000:00:1c.6: PCI bridge to [bus 03-04]
pci 0000:00:1c.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.6: bridge window [mem 0xa1000000-0xa20fffff]
pci 0000:00:1c.7: PCI bridge to [bus 05]
pci 0000:00:1c.7: bridge window [mem 0xa2200000-0xa22fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xa2300000-0xa23fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa20fffff]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xa1000000-0xa20fffff]
pci_bus 0000:05: resource 1 [mem 0xa2200000-0xa22fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 83428K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x96028000-0x9a028000] (64MB)
platform rtc_cmos: registered platform RTC device (no PNP device found)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:1c.0: PME: Signaling with IRQ 121
pcieport 0000:00:1c.5: PME: Signaling with IRQ 122
pcieport 0000:00:1c.6: PME: Signaling with IRQ 123
pcieport 0000:00:1c.7: PME: Signaling with IRQ 124
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:04: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
00:05: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A
00:07: ttyS4 at I/O 0x248 (irq = 10, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-52-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-52-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-52-generic xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-52-generic xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: registered as rtc0
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
intel_pmc_core INT33A1:00: initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ed, pf=0x2, revision=0xde
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1057278548, 18099526)->(1128142481, -52764407)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9587b8cca0bd5e3ad1c932f4859e23820e37ff94'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
pstore: Using crash dump compression: deflate
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 0:677:494
PM: hash matches drivers/base/power/main.c:1316
rtc_cmos rtc_cmos: setting system clock to 2020-12-24T18:27:56 UTC (1608834476)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2716K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1188K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
usb 1-1: new full-speed USB device number 2 using xhci_hcd
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ahci 0000:00:17.0: version 3.0
dca service started, version 1.12.1
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
idma64 idma64.0: Found Intel integrated DMA 64-bit
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
[drm] P2A bridge disabled, using default configuration
[drm] AST 2500 detected
[drm] Analog VGA only
[drm] dram MCLK=800 Mhz type=1 bus_width=16 size=01000000
[TTM] Zone kernel: Available graphics memory: 16361858 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
pps pps0: new PPS source ptp0
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 3c:ec:ef:29:3b:47
igb 0000:02:00.0: eth0: PBA No: 010B00-000
igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 1-1: New USB device found, idVendor=045e, idProduct=07b2, bcdDevice= 7.43
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0
usb 1-1: Manufacturer: Microsoft
fbcon: astdrmfb (fb0) is primary device
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
igb 0000:02:00.0 eno2: renamed from eth0
idma64 idma64.2: Found Intel integrated DMA 64-bit
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xa243a000 port 0xa243a100 irq 134
ata2: SATA max UDMA/133 abar m2048@0xa243a000 port 0xa243a180 irq 134
ata3: SATA max UDMA/133 abar m2048@0xa243a000 port 0xa243a200 irq 134
ata4: SATA max UDMA/133 abar m2048@0xa243a000 port 0xa243a280 irq 134
ata5: SATA max UDMA/133 abar m2048@0xa243a000 port 0xa243a300 irq 134
ata6: SATA max UDMA/133 abar m2048@0xa243a000 port 0xa243a380 irq 134
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
Console: switching to colour frame buffer device 240x67
ast 0000:04:00.0: fb0: astdrmfb frame buffer device
usb 1-7: new high-speed USB device number 3 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 3c:ec:ef:29:3b:46
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: 010BFF-0FF
[drm] Initialized ast 0.1.0 20120228 for 0000:04:00.0 on minor 0
e1000e 0000:00:1f.6 eno1: renamed from eth0
tsc: Refined TSC clocksource calibration: 3408.090 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3120293b7c5, max_idle_ns: 440795350774 ns
clocksource: Switched to clocksource tsc
usb 1-7: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-11: ST2000NM000A-2J2100, TN02, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
usb 1-13: new high-speed USB device number 4 using xhci_hcd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000NM000A-2J2 TN02 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-13: New USB device found, idVendor=1b1c, idProduct=1ab1, bcdDevice= 1.00
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-13: Product: Voyager
usb 1-13: Manufacturer: Corsair
usb 1-13: SerialNumber: 10000005D90749
usb-storage 1-13:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-13:1.0
usbcore: registered new interface driver usb-storage
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver uas
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:07B2.0001/input/input3
hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-1/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:07B2.0002/input/input4
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:07B2.0002/input/input5
hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-1/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:045E:07B2.0003/input/input6
usb 1-7.1: new low-speed USB device number 5 using xhci_hcd
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:045E:07B2.0003/input/input8
hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-1/input2
usb 1-7.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00
usb 1-7.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.0/0003:0557:2419.0004/input/input9
hid-generic 0003:0557:2419.0004: input,hidraw3: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-7.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.1/1-7.1:1.1/0003:0557:2419.0005/input/input10
hid-generic 0003:0557:2419.0005: input,hidraw4: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-7.1/input1
scsi 6:0:0:0: Direct-Access Corsair Voyager 0.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 15773696 512-byte logical blocks: (8.08 GB/7.52 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 6:0:0:0: [sdb] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
sdb: sdb1 sdb2 sdb3
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Started Journal Service.
systemd-journald[998]: Received client request to flush runtime journal.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
IPMI message handler: version 39.2
ipmi device interface
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
dw-apb-uart.2: ttyS5 at MMIO 0xa0002000 (irq = 20, base_baud = 7500000) is a 16550A
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x1b09, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
ipmi_ssif: IPMI SSIF Interface driver
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
e1000e: eno1 NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None
e1000e: eno1 NIC Link is Down
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
perf: interrupt took too long (2524 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3207 > 3155), lowering kernel.perf_event_max_sample_rate to 62250
perf: interrupt took too long (4041 > 4008), lowering kernel.perf_event_max_sample_rate to 49250
perf: interrupt took too long (5053 > 5051), lowering kernel.perf_event_max_sample_rate to 39500
perf: interrupt took too long (6364 > 6316), lowering kernel.perf_event_max_sample_rate to 31250
perf: interrupt took too long (7968 > 7955), lowering kernel.perf_event_max_sample_rate to 25000
perf: interrupt took too long (9996 > 9960), lowering kernel.perf_event_max_sample_rate to 20000
perf: interrupt took too long (12662 > 12495), lowering kernel.perf_event_max_sample_rate to 15750
perf: interrupt took too long (15846 > 15827), lowering kernel.perf_event_max_sample_rate to 12500
perf: interrupt took too long (19946 > 19807), lowering kernel.perf_event_max_sample_rate to 10000
usb 1-1: USB disconnect, device number 2
usb 1-1: new full-speed USB device number 6 using xhci_hcd
usb 1-1: New USB device found, idVendor=045e, idProduct=07b2, bcdDevice= 7.43
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0
usb 1-1: Manufacturer: Microsoft
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:07B2.0006/input/input15
hid-generic 0003:045E:07B2.0006: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-1/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:07B2.0007/input/input16
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:07B2.0007/input/input17
hid-generic 0003:045E:07B2.0007: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-1/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:045E:07B2.0008/input/input18
input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:045E:07B2.0008/input/input20
hid-generic 0003:045E:07B2.0008: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:14.0-1/input2